How To Insulate An Existing Metal Building?

insulate metal building

The absence of good insulation in a metal structure leads to many problems. Consequently, it becomes essential to know how to insulate a metal building?

Since you’ve already invested a lot towards having a garage, why not add an extra layer of protection to it that can increase its lifespan? Whether it’s a garage or a shed, this post will help you find the right insulation at a reasonable price.

Read through the article to get answers from the best industry professionals and learn more about the techniques involved.

Why Is It Important To Insulate A Metal Building?

Finding the best way to insulate a metal building is critical to avoid problems like condensation, rusting, and overheating. The extreme weather phenomena can affect the integrity of your building. This eventually becomes a headache for owners as they have to deal with it daily.

As everyone knows, metal is prone to rust and causes structural damage to your property. Adding a few layers of insulation will not only protect you from heat and rust but also prolongs its life.

Benefits Of Insulating A Metal Building

We cannot stress enough how important metal garage insulations are for comfortable living. It also plays a major part in energy conservation. Apart from the obvious benefits you derive from insulation, the other ways by which you can benefit are listed below.

  • Establishes And Regulates An Ideal Room Temperature

Insulation acts as a barrier to outside temperature change. By regulating the heat flow between inner and outer space, it helps in controlling and maintaining the interior building temperature. Thus, knowing how to insulate an existing metal building properly can save the money that you spend on heating and cooling systems.

  • Controls Moisture Levels

The fundamental reason why people need insulation is to prevent rusting and condensation. Both of these occur due to moisture and insulation can reduce this effect.

  • Sound Proofing Your Workplace

This works both ways. This means that inside noises will stay inside and outside sounds won’t be allowed to enter your house. With some effort and interior padding, you can keep your neighbors happy and enjoy the improved sound quality.

metal building

How To Insulate A Metal Building?

Following are the insulation techniques that you should know before you decide to choose one.

  • Fiberglass

If you are looking for a pocket-friendly option that can safeguard your metal building then fiberglass is best for you. Fiberglass is also the most prominent insulation technique out there that comes in a roll made up of a material named blanket insulation. However, to install fiberglass insulation, you’ll need to wear a lot of protective gears and take ample safety measures.

Our advice is that you should leave this task to the professionals. They will install the fiberglass insulation with different laminates in a very short time.

  • Reflective Foil

Reflective foils also known as double bubble are waterproof coating that also stop heat exchange between surfaces. This technique is straightforward and takes very little investment. You can use reflective foils if you want a quick solution to the lack of insulation inside your metal shed. By this way you can easily insulate an existing metal building.

  • Spray Foam

Spray foams are by far the most effective insulation technique in this list. This extremely popular method of insulation is long-lasting and seals the entire envelope leaving no place for heat exchange. You can choose between two kinds of spray foam- open and closed depending on which type of spray foam is needed for your building.

Although it is a little expensive, it justifies this money through its longevity and effectiveness. To apply spray foam you’ll need the help of a contractor who has spray foaming training.

  • Rigid Board

The rigid board is all-season suitable insulation. If you’re someone who happens to live in a region where the temperature fluctuates then the rigid board is the right way to go.

However, installing rigid boards requires massive panels and broadened fasteners that must be left on professionals to handle.

Features That Make The Best M Building Insulation

When you think of perfect insulation, what comes to your mind? Most of you would say that it should stop condensation, some of you will also agree that heat and air must also be ceased. To help you further understand what are the factors that make the best metal building insulation, here’s a list of features you can go through.

  • Insulation Must Stop Condensation

It doesn’t take a long time for an unprotected metal building or shed to turn into a rainforest once condensation starts to occur. Especially on those days when the temperature difference between day and night is a lot higher than usual. Scorching rays from the sun hitting the metal sheet(cold) create a temperature difference between the inside and outside of your metal shed resulting in condensation.

To prevent this from happening, you must insulate your metal garage or shed. Insulation acts as a barrier that eliminates temperature differences and makes the temperature inside and outside the building nearly the same.

  • Restrains Heat Transfer

You might have noticed how hot it gets inside your garage during summers. This is because the sun rays striking the roof of your metal garage radiate downwards. This continuous transfer of heat increases the temperature of your rooftop making it unbearably hot inside the building as well.

The same phenomenon can be observed during winters when the metal sheets start to cool down promptly. This makes it extremely cold and you feel like you’re inside an icebox.

To prevent the transfer of heat and cold you can use something called the R-value treatment. Insulating an existing metal roof with R-value will provide you greater protection from changes in temperature inside your building.

  • Avoids Air Transfer

Air carries moisture that results in rusting. Also, the unwanted flow of air can be harmful to the integrity of the metal building in case of an emergency( spread of gases and smoke during a fire).

To make your building airproof, choosing the right insulation is significantly important. Thus, by doing so an air barrier also acts as a gas barrier becoming a vital safety feature.

  • Prevents Formation Of Molds

Metal garage insulation must tend to demote any formation of molds and mildew. Fungi like Penicillium funiculus, Aspergillus avus and Aspergillus niger are most likely to build upon the walls and roofs. So, make sure to insulate your garage roof with the right insulation.

  • Helps In Sound Proofing

Do you also get annoyed by the exaggerated sound of raindrops and sleet on the metal skin of your building?

When you insulate your metal garage, it forms a sound barrier that assists to deaden unwanted noise from the outside.

  • Easy And Affordable To Install

You would be surprised to know how ridiculously simple it is to install insulation. Depending on the type of material used, you can do it all by yourself also. Something like fiberglass will cost you extra time to install as compared to foam spray.

Promising And Cheapest Ways To Insulate A Metal Building

At the end of the day, the primary reason why we all emphasize so much on selecting the best insulation for our metal buildings is to save money and make them more comfortable. You can’t usually see insulation, but you would know if it’s not present.

We are here to solve all the problems that are stopping you from getting the best insulation. Go through the roster of the cheapest way to insulate a metal building.

  • Spray Foam Insulation
  • R-Value
  • Cellulose Insulation
  • Rigid Foam Insulation
  • Radiant Barrier

And above all are the recycled materials that you can easily locate and use.

Tips And Tricks

What comes to your mind when you think about the functionality of denim jeans?

I bet nobody would think about using them as insulation for their walls. Denims are the perfect solution for those who want to recycle. But just stuffing your old pair of jeans is not enough. Denim used to insulate metal garage or any other metal structure require insect and fireproofing.

Similar to fiberglass insulation, UltraTouch denim insulation comes in rolled batts. However, this technique of insulation costs three-times more than the usual R-value but is recyclable.

As we’re proceeding towards the end of our review, let’s see what we can do to make your insulation look good.

Make Your Insulation Shine

Your building gets a raw industrial look after using products like spray foam and radiant barriers. But the question here is: Is this what you want?

If not, then take an extra step to decorate your walls by adding wallpapers or drywall over them. With drywalls, you can enjoy hanging photos with the help of a photo editor. Although this is not a necessary step yet it does create a charming look. Thus you can insulate an existing metal building without any hassle.

Leave a comment

Your email address will not be published. Required fields are marked *